Request Information
These models have water cooled compressors and require an external water source to operate.
Unit of Measure

Working Temperature Range

 N/A -50 to 100 ºC

Temperature Accuracy

 N/A ±0.1 ºC

Display/Controller Type

 N/A Digital/Fuzzy Logic

Heater Capacity 220 V/115 V

 N/A 3000 W

Cooling Capacity at 20°C

 N/A 5000 W

Max. Pressure (Pump)

 N/A 560 mbar

Max. Flow Rate (Pump)

 N/A 24 L/min

Max. Suction Rate (Pump)

 N/A 22 L/min

Bath Opening (W x L x D)

 N/A 22 x 27 x 20 cm

Bath Volume

 N/A 24 L

Overall Dimensions

 N/A 50 x 75 x 109 cm

Electrical Requirements

 N/A 220 V/3 Ph/60 Hz

Power Consumption

 N/A 5800 V·A

Net Weight

 N/A 180 kg

Thermo Electron No.

 N/A 447-0504

Haake Part No.

 N/A Haake P2-CT50W-7

N/A

    DC model features a pressure only pump and is recommended for smaller reactors sizes 4 liters and under. A touch pad front panel display shows menu options and temperature selections separately. Select and save up to three different fixed temperatures simultaneously. The DC30-K20 has a low liquid level protection feature and also has an RS232 interface with optional software available.

    P1 and P2 Models Feature 16-bit processor technology, temperature selection in Celsius, Fahrenheit, or Kelvin, simultaneous SET/ACTUAL display, cooling circuit overload, low-liquid level protection, with audible alarms, RS232 interface, and are fully programmable with ramping capabilities. Combined pressure/suction pumps allow for circulation to open systems. The P1 model can store one ramp program with up to 30 segments and the P2 can store up to 10 ramp programs. The P2 model also has an on/off timer. Any P1 model listed can also be ordered as a P2.