These models have water cooled compressors and require an external water source to operate.
Unit of Measure
Working Temperature Range |
N/A -90 to 100 ºC |
Temperature Accuracy |
N/A ±0.1 ºC |
Display/Controller Type |
N/A Digital/Fuzzy Logic |
Heater Capacity 220 V/115 V |
N/A 2000 W |
Cooling Capacity at 20°C |
N/A 1900 W |
Max. Pressure (Pump) |
N/A 560 mbar |
Max. Flow Rate (Pump) |
N/A 24 L/min |
Max. Suction Rate (Pump) |
N/A 22 L/min |
Bath Opening (W x L x D) |
N/A 22 x 14 x 20 cm |
Bath Volume |
N/A 15 L |
Overall Dimensions |
N/A 50 x 90 x 109 cm |
Electrical Requirements |
N/A 220 V/3 Ph/60 Hz |
Power Consumption |
N/A 5300 V·A |
Net Weight |
N/A 185 kg |
Thermo Electron No. |
N/A 449-0904 |
Haake Part No. |
N/A Haake P2-CT90W-10 |
N/A
P1 and P2 Models Feature 16-bit processor technology, temperature selection in Celsius, Fahrenheit, or Kelvin, simultaneous SET/ACTUAL display, cooling circuit overload, low-liquid level protection, with audible alarms, RS232 interface, and are fully programmable with ramping capabilities. Combined pressure/suction pumps allow for circulation to open systems. The P1 model can store one ramp program with up to 30 segments and the P2 can store up to 10 ramp programs. The P2 model also has an on/off timer. Any P1 model listed can also be ordered as a P2. |