With removable snyder column sidearm

Extractor designed for EPA priority pollutant samples where the extracting solvent is heavier than water. Both extraction and concentration are performed with the same apparatus. With 2 mm PTFE stopcock.

This Dean-Stark distillation receiver is added to a condenser. Soxhlet extractor, and flat bottom flask which will serve to remove water and CDD/CDF from wet particulate samples without loss of analyte or contamination of sample.

For use in the Toxicity Characteristic Leaching Procedure, EPA Method 1311. Bottles are heavy-walled and plastic-coated. Caps have PTFE lining.

Reservoir will hold approx. 60 ml of extract.

Extractor body only. use with Allihn condenser and round or flat bottom flask.

Allows extraction at the boiling point of the solvent.

Sizes correspond to QEE-10. Available in Fine, Medium, Coarse and X-Coarse porosities

This Dean-Stark distillation receiver is added to a condenser, Soxhlet extractor, and flat bottom flask which will serve to remove water and CDD/CDF from wet particulate samples without loss of anolyte or contamination of sample.

Extractor designed for EPA priority pollutant samples where the extracting solvent is heavier than water. Extractor body has a 45/50 top joint and 24/40 side joint. For use with an Allihn condenser and 100 mL R.B. Flask.

Extractor designed for EPA priority pollutant samples where the extracting solvent is heavier than water; however, return tube has a 2 mm PTFE stopcock which will stop the flow after the extraction is complete. Extractor body has a 45/50 top joint and 24/40 side joint. For use with an Allihn condenser and 1000 mL R. B. Flask.

With removable snyder column sidearm

Extractor designed for EPA priority pollutant samples where the extracting solvent is heavier than water. Both extraction and concentration are performed with the same apparatus. With 2 mm PTFE stopcock.

Extractor designed for EPA priority pollutant samples where the extracting solvent is lighter than water. Extractor body has a 45/50 top joint and 24/40 side joint. For use with an Allihn condenser and 1000 mL R.B. Flask.

Extractor designed for EPA priority pollutant samples where the extracting solvent is lighter than water; however, return tube has a 2 mm PTFE stopcock which will stop the flow after the extraction is complete. Extractor body has a 45/50 top joint and 24/40 side joint For use with an Allihn condenser and 1000 mL R. B. Flask.